16 W UV sterilizer (0, 8 m 3-800 litres / hour) with bulb Philips + ready to install ballast
Main fields of application:
-Purification of raw water from local resources (wells, boreholes,...), water stored in reserve and then recycled for sanitary use
-The pool water treatment
-Destruction of organic pollutants
-Destruction of spores of algae which prevents the proliferation of algae from your pools, ponds, etc...
All stainless steel
Weight: 1.3 kg
Outside dimensions: 63 mm x 360 mm
Input and output: o (12/17) mm - female thread
Maximum pressure: 6 bars
Maximum recommended flow rate: 0.8 m3/h - 800 liters per hour
Warranty 2 years
Philips UV lamp:
The UV lamp fits into the tube quartz inside the body of the stainless steel reactor
Lamp power: 16 W Tube 4 p SE TUV GERMICIDAL UVC
Supply voltage: 230 V mono
Average life: 9,000 hours
Independent 12v transformer of the reactor
Power supply: 230 V / 50 Hz
Power consumption: 16 W
Operation indicator light
To optimize the effectiveness of the UV sterilizer, it is important to ensure the good quality of the water to be treated
To do this, it is strongly recommended to install one or more filters upstream, according to nature of sediments to filter. (See our double filter a particle for UV sterilizer)
What can make the difference:
There is no microorganism known to the Ultra violet, in contrast to the treatment of water with chlorine-resistant.
The UV is known to be highly effective against bacteria, viruses and algae.
In practice, the bacteria and viruses are the cause of many pathogenic diseases carried by water.
Of these viruses, hepatitis and Legionella showed faculties to survive treatment with chlorine for considerable periods of time, but are easily eliminated by UV treatment.
For most microorganisms, effectiveness of UV against microbiological contaminants such as bacteria and viruses usually exceed 99.99%.
The water by UV treatment is very effective (more than 99.99%) Cons: Salmonella (typhoid fever), salmonella enteritidis (gastroenteritis), vibrio cholerae (cholera), Mycobacetrium tuberculosis (TB), Legionella pneumophila (Legionella), influenza, polio, and Hepatitus.
We also offer some power 11w UV sterilizers, 25w, 40w, 80W, 120W, 160W
Delivered complete with reactor in stainless, ballast 12v bulb Philips tube quartz, wall mounts...
Sterilization by UV consists mainly of the destruction of organic pollutants, spores of algae and other organic bacteria only by Ultra Violet radiation without chemicals
Body in stainless steel - lamp UV 25 W Philips®
Maximum recommended flow rate: 1.8 m3/h (1 800 L/h)
Destruction of bacteria and viruses without adding chemicals!
Maximum recommended flow rate: 3 m3 / h - 3 000 litres per hour
Body in stainless steel with UV lamp power 40 W Philips®
Destroys all bacteria contained in the water including chloramines
This Tube TUV germicidal UVC Philips allows you to destroy bacteria, viruses and other primitive organisms in drinking water, wastewater, water
pools, cold rooms, etc...
System very efficient disinfection of water and air, used in hospital settings, in the bacteriological research environments and
pharmaceutical, as well as in the food industry...
Complete kit ready to install with reactor stainless, transformer 12v, bulb Philips, quartz and joint sealing
The water by UV treatment is very effective (more than 99.99%) Cons: Salmonella (typhoid fever), salmonella enteritidis (gastroenteritis), vibrio cholerae (cholera), TB of
Mycobacetrium (TB), Legionella pneumophila (Legionella), influenza,...