Door filter + protection anti limestone silicophosphate 200 m 3 of treatment

Door filter in 9 3/4 with his silicophosphate cartridge 

Technical characteristic:

-Filter in two parts equipped with a centering device of cartridge to facilitate their replacement

-Events equipped with o-rings for a perfect seal.

-Brass inserts to avoid distorting the threads, source of future leaks.

Maximum flow with cartridges: 1500 L/h, Frost, input / output 3/4 inch.

-Mounts before the devices to protect

-Entry/exit 20/27

-Static pressure maximum 5 bars

-Installation of a pressure reducer set to 4 bars is mandatory.

-It is recommended to install a check valve at the output of the filter door

-A valve anti-polution upstream of the product and after the water meter is required.

-Frost

-To be mounted in a place away from the light and dry.

-Do not use sealing paste or paste to seal, use preferably teflon

-Leave a space of at least 5 cm below the tanks for easy maintenance

-treatment of 200 m³ 

Maintenance:

-Before changing the cartridge, turn off the water and unscrew the vents to atmospheric pressure

-Loosen the tank using the key, and then by hand

-Change the cartridge, and grease the o-ring of the bowl with food fat

-Replace the tank and tighten by hand, do not tighten to the key. The key is only used to release the filter tanks

-At the time of restore water, power vents to clear the air

-The silicophosphate cartridge is to replace environment every 6 months. Battery life depends on the quality of your water and your use.

-In the case of no more than 2 days use, run the water for 5 minutes before use

-We recommend to replace the cartridge every 6 months to 1 year

* Reminder 1milimetre = 1000 microns

-