Hammam cabin construction kit to be tiled 150 x 90 with steam generator

Hammam cabin construction kit to be tiled 150 x 90 with steam generator

Panels can be rail mounted or glued directly to existing walls.

Please note: this is not a pre-assembled cabin. The elements supplied make it possible to create a cabin of approximately L 150 x W 90 cm. Height between 200 and 240 cm (you can cut the panels to adjust the height).

Assembly principle:

1 – Prepare the existing rail and/or wall structure

2 – Preparation of the screed with evacuation and installation of the tray

3 – Installation of XPS panels (screwed on rails / glued on walls) - Walls + sloping roof

4 – Installation of the bench and the niche

5 – Installation of the door

6 – Coat the panels and tile

7 – Installation of accessories (Lighting, steam outlet nozzle, temperature probe)

* The rails (panel and door fixings) are not supplied. Excluding tiling, excluding installation

Kit contents:

1 x Desineo 4KW Hammam Steam Generator for Professional or Home Use Automatic Drain

1 x Kit of 2 Spotlights 68mm Ø RGB Ip68 Waterproof Recessed + Button, Spotlight Control System And Transformer

22 x Building Panel 1250 x 600 x 30mm Extruded Rigid XPS Ready To Tile Valstorm

1 x Hammam Bench 90 X 40 X 50cm Ready To Tile In XPS

1 x Niche In XPS Ready To Tile 600 X 300 X 90 Mm Premium For Hammam Bathroom

1 x Door For Hammam Transparent or Bronze 80 X 190 Cm

1 x Shower Tray 150x90x3 Cm Linear Flow Ready To Tile With Siphon + Stainless Steel Grid

1 x SIKATOP 121 SURFACAGE Waterproofing Mortar 10Kg Kit

1 x Stainless Steel Fixing Washers (X50) For Ready To Tile Panels

1 x 10cm Width Fiberglass Rebar Tape (45 Meter Length) For XPS Panel Junctions

1 x Connection kit for steam generator - silicone hose. Length to be defined according to the location of the generator