PAR56 light bulb with remote 501LED 35W for pool

PAR56 light bulb with remote 501LED 35W for pool

The lighting of your pool becomes economical thanks to LEDS, 35W for equivalent radiation technology

Consumption is 20 times less, and the life expectancy is 50 times higher than that of conventional halogen bulb.

Standard format, it allows to replace your old halogen without changing transformer

Choice of colors and the mode in 1 click!

7 colors available, 5 controllable environments since the remote control!

The lamp has 12 programs controlled by the remote control (range of 10 meters, remote antenna unfolded).

Too deep immersion may restrict the use of the remote control to a shorter distance. To return to the original program, simply cut the current more than 5 seconds.

Installation

PAR56 led lamps adapt to most of the dwellings of pool lighting. The installation is carried out without specific work.

-Before any operation, turn off the power to the projector.

-Take out the light of the pool block and defeats the bulb support.

-Unplug the bulb outside water.

-Check and change if necessary the seal as well as the support of bulb.

-Spread a layer of silicone in each side of the joint.

-Plug the LED lamp, screw the support, let dry silicone for 15 minutes and replace the projector in its niche.

-Check the tightness of the support and turn on

Technical features:

Ability to synchronize several bulbs with the same remote!