Contact us

Pool PAR56 18 x 3W LED with remote control bulb View full size

Pool PAR56 18 x 3W LED with remote control bulb

Multi-colored led for pool bulb, equipped with 18 LED high intenste of 3w!

7 colors available, 5 atmospheres teachable since the remote control!

Corresponds to a light 300 W hallogen and consumes only 54 W! 

More details


179,90 €

Multicolor LED with remote control bulb!

The lighting of your pool becomes economical thanks to the led technology.
PAR56 lamps is 30 000 to 50,000 hours of operation.

Consumption is 20 times less, and the life expectancy is 50 times greater than a traditional incandescent bulb.

 Standard format, it allows to replace your old hallogenes.


Choice of colors and mode

Create a mood with 1 click!



7 colors available, 5 controllable environments since the remote control!


The lamp has 12 programs controlled by the remote control (range of 10 meters, remote antenna unfolded). Too deep immersion may restrict the use of the remote control to a shorter distance. To return to the original program, simply cut the current more than 5 seconds.




PAR56 led lamps adapt to most of the spotlight of pool lighting. The installation is carried out without specific work.


-Before any operation, turn off the power to the projector.
-Take out the light of the pool block and defeats the bulb support.
-Unplug the bulb outside water.
-Check and change if necessary the seal as well as the support of bulb.
-Spread a layer of silicone in each side of the joint.
-Plug the LED lamp, screw the support, let dry silicone for 15 minutes and replace the projector in its niche.
-Check the tightness of the support and turn on the lamp.







Reference:   Par56 RGB
Color:   RGB
Number of leds:   18 x 3 W

 ~ 2400 lm

Consumption:   54 W

 178 mmx108 mm

Weight:   0.800
Warranty:   1 years
     Power supply 12 V-54 w ~ AC
Corresponds to a 300W halogen bulb and consumes 54W! 


Ability to synchronize several bulbs with the same remote!