Hammam cabin construction kit to be tiled 200 x 120 with steam generator

Panels can be rail mounted or glued directly to existing walls.

Please note: this is not a pre-assembled cabin. The elements supplied make it possible to create a cabin of approximately L 200 x W 120 cm. Height between 200 and 240 cm (you can cut the panels to adjust the height).

Assembly principle:

1 – Prepare the existing rail and/or wall structure

2 – Preparation of the screed with evacuation and installation of the tray

3 – Installation of XPS panels (screwed on rails / glued on walls) - Walls + sloping roof

4 – Installation of the bench and the niche

5 – Installation of the door

6 – Coat the panels and tile

7 – Installation of accessories (Lighting, steam outlet nozzle, temperature probe)

* The rails (panel and door fixings) are not supplied. Excluding tiling, excluding installation

Kit contents:

1 x Desineo 6KW Hammam Steam Generator for professional or home use Automatic Drain

1 x Kit of 3 Spotlights 68mm Ø RGB Ip68 Waterproof Recessed + Button, Spotlight Control System And Transformer

28 x Building Panel 1250 x 600 x 30 mm Extruded Rigid XPS Ready To Tile Valstorm

1 x Hammam Bench 1000 X 450 X 470 mm Ready To Tile In XPS

1 x Corner Bench For Hammam 1000 X 1000 X 470 mmm Ready To Tile In XPS

1 x Niche In XPS Ready To Tile 600 X 300 X 90 Mm Premium For Hammam Bathroom

1 x Door For Hammam Transparent or Bronze 70 X 190 Cm

1 x Shower Tray 80x80x4 Cm Central Drain Ready To Tile With Siphon + Stainless Steel Grid

1 x SIKATOP 121 SURFACAGE Waterproofing Mortar 10Kg Kit

1 x Stainless Steel Fixing Washers (X50) For Ready To Tile Panels

1 x 10cm Width Fiberglass Rebar Tape (45 Meter Length) For XPS Panel Junctions

1 x Connection kit for steam generator - silicone hose. Length to be defined according to the location of the generator