New range of professional steam generators all options:
-Command remote control switching on the unit, time, temperature, lighting, draining...
The remote control also has 8 LEDS of integrated diagnosis which will tell you the operations
current order to remotely control the functioning of the unit as well as to manage its maintenance.
-Steam on demand from a second order deported with push button. (press 5 seconds
the "Drain" to activate the steam on demand, the device option button maintain the water at about 80
degrees so that the steam on demand button is pressed. Once the button press the device generates again steam within 30 seconds.
The Red led lights up during the 30 minutes of operation,
Once past the generator time continues to keep the water at 80 °, then the light turns off. Just then
Press the button again to revive a 30 minute session. (allows savings of energy and water during calmer periods)
-Continuous steam: For a continuous market set the duration on 240 minutes and press "SET" to trigger the "continuous steam" mode.
-Programming the duration: The arrows allow you to choose a period ranging from 10 to 240 minutes
-Temperature adjustment: The arrows allow you to choose a temperature between 30 to 60 ° c
-Cleaning Automatic VAT: Once the water is cooled, the tank drain automatically and fills again to rinse it to avoid
his entartrement and the settlement of limestone deposits. However, it is essential to protect the limestone steam generator by using a filter
anti-limescale system, as well as to conduct regularly for cleanings, especially for intensive uses.
-Simplified scaling: You just remove the 4 screws present on the upper part of the unit to access the water level probe.
Once removed, you can pour the citric acid by the hole and close the hatch, then area turn the device without users in the hammam
drain to remove any deposits - once your device is cleaned!
-Nozzle anti-scald: A red PVC anti burns and visible nozzle is provided
-Sensor protection: a small conical cage is provided to protect the probe of potential shocks on the part of the users
Useful volume of heating: 10-16 m3 The generator size: 39x20x41.5 cm Weight: 15kgs The control box size: 15 x 9 cm / 2 m cable length Size of the package "steam on demand: 6 x 6 cm" Probe 3 Mmo cable on 3.2 meters, size of the cache for probe: 4.5cmo Nozzle steam output: 10.5 Cmo female thread 15/21 (1/2) Water supply: 20/27 (3/4) male Out of steam: 20/27 (3/4) male Oil change: 15/21 (1/2) male / pressure valve 15/21 (1/2) female Electricity: 220v single-phase or three-phase 380v (without modification to the device) Water consumption: ~12l/h 2 year warranty (excluding the problem related to the limestone or abnormal use)
The steam generator must be getting power with electric protection adapted to your installation and the standards in force. (the power supply must be connected to the connecting unit electric Terminal)
The control box connects to the motherboard of the device for adjustment of the temperature, time and accessories... 5 meters, the probe, she, cable is wired on a length of 3.2 metres.
Generator Lee must then be supplied with water. (allow a limestone anti system to avoid any problem on the device, or difficulty of operation)
Connection of the valve pressure and draining to the evacuation
Connection of the output of steam to the nozzle by means of a copper or flexible hose corrugated steel (available in our hammam accessories) as well as all materials resistant to a temperature of 110 degrees with a diameter of 16 see 18 O) (maintain a slope allan t of the steam generator to the mist outlet nozzle)
Warranty 2 years
Contact our customer service for details at 04 94 82 20 80
Programmable on a length of 99 minutes, sold with nozzle steam output, control box, sensor, exhaust fan and ozonator (accessory 12V ultrasonic disinfection).
Automatic drain steam generator, perfect for home use
Suitable for an area of about 9 to 12 M3
Recommended for home use, sold with accessories (nozzle steam output, Control Panel, probe, ozone generator and fan 12 V...)
Suitable for an area of about 5 to 9 m3, robust, easy to install and use, fast heat-up time
Programming length (0 to 99 minutes), the temperature of the steam room, control of light, ventilation and automatic drain
For 3 to 6 m3 hammam spaces
Steam generator comes with control box, probe and mist outlet nozzle
Programming the duration of the session 0 to 999 minutes, and the room temperature between 40 and 60 °
Stainless drain automatic and transformer 12 V built-in tank control accessories
Steam generator for full hammam with accessories for spaces of 12 to 18 m3
Control box "full options" (control of light, ventilation, the duration of the session (0-999 minutes), Temperature 40-60 ° c)
Temperature probe and provided steam release nozzles, automatic drain end, tank inox, transformer built-in 12v and pre-wired lighting to facilitate...
For cabin and steam room of small volume from 1 to 3 m 3
Delivered ready to be plugged into a power outlet.
Complete kit with Aromatherapy nozzle, ventilation, ozonator, FM radio, speaker, phone, LCD screen, automatic drain, stainless steel tank function...