New generation of professional steam generators all options:
-Deported with control of switching on the unit, length, temperature, lighting, drainage and possible failures...
The remote control has 8 LEDS of built-in diagnostics that will show you the current operations so to remotely control the functioning of the unit
-Steam on demand from a second order deported with push button
(Press 5 sc on the "Drain" button activates the steam on demand, the device option will maintain the water at about 80 degrees until the steam on demand button is pressed.
Once the button is pressed, the device generates again steam within 30sc. The Red led lights up during the 30-minute operation, once the time past the generator continues to conserve water at 80 °, then the light goes off.
Then just press the button to relaunch a 30 minute session. (allows savings of energy and water during calmer periods)
For a continuous market set the duration on 240 minutes and press "SET" to trigger the "continuous steam" mode.
-Programming of the duration
The arrows allow you to choose a period ranging from 10 to 240 minutes
The arrows allow you to choose a temperature between 30 to 60 ° c
-Automatic cleaning of the tank
at the end of each use, once cooled water. the tank drain automatically. Then the Bowl fills again to rinse to clean and avoid deposits of limestone.
For proper operation of the machine it is essential to protect the limestone and to conduct regularly for cleanings.
Just remove the 4 screws present on the upper part of the unit to access the water level probe. Once removed, it must pour citric acid by opening and closing the door. Do the machine cut it and wait a few hours before you turn it on and press "Drain".
Your device is cleaned!
A red nozzle PVC is provided to avoid burns
a small conical hatch is provided to protect the probe of potential shocks on the part of the users
Useful volume of heating: 8 to 12 m3
The generator size: 45 x 20 x 35 cm
Weight: 13.6 kgs
The control box size: 15 x 9 cm / 5 m cable length
Size of the limp "steam on demand": 6 x 6 cm 3 mm O probe cable on 3.2 meters, for probe cache size: 4.5 cm O
Nozzle steam output: 10.5 cm O female thread 15/21 (1/2)
Electricity: 220v single-phase or three-phase 380v (without modification to the device)
Water consumption: ~ 10L/hour
Warranty 2 years
(off problems associated with limestone or abnormal use)
The steam generator must be getting power with the right power protection. (the power supply of the meter must be connected to the terminal block for connecting electrical power to the unit)
The control box connects to the motherboard of the unit for the temperature setting, time etc... the cable measures 5 meters, the probe should be placed halfway up the hammam room. The probe is wired on a length of 3.2 metres.
The steam generator must then be supplied with water. (allow a limestone anti system to avoid any problem on the device, or difficulty of operation)
We connect the pressure release valve and draining to the evacuation.
We connect the output of steam to the nozzle by means of a copper or flexible hose corrugated steel (available in our hammam accessories) as well as all materials resistant to a temperature of 110 degrees with a diameter of 16 see 18 O) must also keep a pen you from the steam generator to the mist outlet nozzle.
Programmable on a length of 99 minutes, sold with nozzle steam output, control box, sensor, exhaust fan and ozonator (accessory 12V ultrasonic disinfection).
Automatic drain steam generator, perfect for home use
Suitable for an area of about 9 to 12 M3
Suitable for an area of approximately 12 to 18 M3 of very good quality
Remote control of 5 m with the temperature settings and time, control of light, ventilation, disinfection by ozone generator and drain automatic to limit the entartrement of the tank
Recommended for home use, sold with accessories (nozzle steam output, Control Panel, probe, ozone generator and fan 12 V...)
Suitable for an area of about 5 to 9 m3, robust, easy to install and use, fast heat-up time
Programming length (0 to 99 minutes), the temperature of the steam room, control of light, ventilation and automatic drain
For 3 to 6 m3 hammam spaces
Steam generator comes with control box, probe and mist outlet nozzle
Programming the duration of the session 0 to 999 minutes, and the room temperature between 40 and 60 °
Stainless drain automatic and transformer 12 V built-in tank control accessories
Steam generator for full hammam with accessories for spaces of 12 to 18 m3
Control box "full options" (control of light, ventilation, the duration of the session (0-999 minutes), Temperature 40-60 ° c)
Temperature probe and provided steam release nozzles, automatic drain end, tank inox, transformer built-in 12v and pre-wired lighting to facilitate...