Professional steam generator 6kw Intense for Hammam
-Command remote with controls the ignition unit, time, temperature, lighting and drainage...
The remote control also has 8 LEDS of built-in diagnostics that will show you the current operations so to remotely control the functioning of the unit.
-Steam on demand from a second order deported with push button. (press the "Drain" button for 5 seconds to activate the steam on demand option) The device will maintain the water at about 80 degrees until the steam on demand button is pressed. Once the button is pressed, the device generates steam within 30 seconds again. The Red led lights up during the 30-minute operation, once the time spent, the generator continues to conserve water at 80 °, then the light goes off. Simply press the button again to revive a 30 minute session. (allows savings of energy and water during calmer periods and get a faster filling of the hammam space)
For a market in continuous program duration on 240 min and press "SET" to trigger the "continuous steam" mode
-Programming the duration:
The arrows allow you to choose a period ranging from 10 to 240 min
The arrows allow you to choose a temperature between 30 to 60 ° c
-Cleaning Automatic VAT:
At the end of each use, once cooled water. the tank drain automatically. Then the Bowl fills again to rinse to clean and avoid the deposit of limestone
For proper operation of the unit, it is essential to protect the limestone and to conduct regularly for cleanings
Just remove the 4 screws present on the upper part of the unit to access the water level probe. Once removed, it must pour citric acid by opening and closing the door. The machine then cut it and wait a few hours before you turn it on and press "drain"
A red nozzle PVC is provided to avoid burns
A small conical hatch is provided to protect the probe of potential shocks on the part of the users
Useful volume of heating: 5-9 m3 The generator size: 39 x 19 x 34 cm Weight: 11.6 kg The control box size: 15 x 9 cm / 5 m cable length Size of the limp "steam on demand": 6 x 6 cm Probe diameter 3 mm cable on 3.2 meters, diameter of the cache for probe: 4.5 cm Nozzle steam output: 10.5 cm diameter, female thread 15/21 (1/2) Water supply: 15/21 (1/2) male Out of steam: 15/21 (1/2) male Oil change: 15/21 (1/2) male / pressure valve 15/21 (1/2) female Electricity: 220v single-phase or three-phase 380v (without modification to the device) Water consumption: ~7l/ h 2 year warranty (excluding the problems associated with limestone or abnormal use)
The steam generator must be getting power with the right power protection. (the power supply must be connected to the terminal block for connecting electrical power to the unit)
The control box connects to the motherboard of the unit for the temperature setting, time etc... 5 meters, the probe cable must be placed halfway up the hammam room. The probe is wired on a length of 3.2 metres.
We're feeding the generator in water. (provide an anti-scale system)
We connect the pressure release valve and draining to the evacuation.
We connect the output of steam to the nozzle by means of a hose hose (available in Accessories for hammam) corrugated steel or copper. All the materials that are resistant to a temperature of 110 degrees with a diameter of 16 see 18 mm. We must also maintain a slope ranging from the steam generator to the mist outlet nozzle.
Programmable on a length of 99 minutes, sold with nozzle steam output, control box, sensor, exhaust fan and ozonator (accessory 12V ultrasonic disinfection).
Automatic drain steam generator, perfect for home use
Suitable for an area of about 9 to 12 M3
Suitable for an area of approximately 12 to 18 M3 of very good quality
Remote control of 5 m with the temperature settings and time, control of light, ventilation, disinfection by ozone generator and drain automatic to limit the entartrement of the tank
Recommended for home use, sold with accessories (nozzle steam output, Control Panel, probe, ozone generator and fan 12 V...)
Suitable for an area of about 5 to 9 m3, robust, easy to install and use, fast heat-up time
Programming length (0 to 99 minutes), the temperature of the steam room, control of light, ventilation and automatic drain
For 3 to 6 m3 hammam spaces
Steam generator comes with control box, probe and mist outlet nozzle
Programming the duration of the session 0 to 999 minutes, and the room temperature between 40 and 60 °
Stainless drain automatic and transformer 12 V built-in tank control accessories
Steam generator for full hammam with accessories for spaces of 12 to 18 m3
Control box "full options" (control of light, ventilation, the duration of the session (0-999 minutes), Temperature 40-60 ° c)
Temperature probe and provided steam release nozzles, automatic drain end, tank inox, transformer built-in 12v and pre-wired lighting to facilitate...