New range of professional steam generator options:
-Command remote control switching on the unit, time, temperature, lighting, draining...
The remote control also has 8 LEDS of integrated diagnosis which will tell you the current operations, so to remotely control the good operation of the device.
-Steam on demand from a second order deported with push button.
Press the "Drain" button for 5 seconds to turn on steam on demand, the device will maintain the water at about 80 degrees until the steam on demand button is pressed.
Once the button press the device generates again steam in less than 30 SC. The Red led lights up during the 30 minutes of operation, once the time past the generator continues to conserve water at 80 °, then the light goes off. Then just press the button to relaunch a 30 minute session. (allows savings of energy and water during calmer periods)
For a continuous market set the duration on 240 minutes and press "SET" to trigger the "continuous steam" mode.
-Programming the duration:
The arrows allow you to choose a period ranging from 10 to 240 minutes
The arrows allow you to choose a temperature between 30 to 60 ° c
-Cleaning Automatic VAT:
at the end of each use, once cooled water. the tank drain automatically. Then the Bowl fills again to rinse to clean and avoid the deposit of limestone.
For proper operation of the appliance it is essential to protect the limestone and to conduct regularly for cleanings.
Just remove the 4 screws present on the upper part of the unit to access the water level probe. Once removed, it must pour citric acid by opening and closing the door. Do the machine cut it and wait a few hours before you turn it on and press "Drain".
Your device is cleaned!
A red nozzle PVC is provided to avoid burns.
a small conical hatch is provided to protect the probe of potential shocks on the part of users.
Useful volume of heating: 3-5 m3 The generator size: 39 x 19 x 34 cm Weight: 11 kg The control box size: 15 x 9 cm / 5 m cable length Size of the package "steam on demand: 6 x 6 cm" Probe 3 Mmo cable on 3.2 meters, for probe cache size: 4.5 Cmo Nozzle steam output: 10.5 Cmo female thread 15/21 (1/2) Water supply: 15/21 (1/2) male Out of steam: 15/21 (1/2) male Oil change: 15 / 21 (1/2) male / pressure valve 15 / 21 (1/2) female Electricity: 220v single-phase only
(6kw, 9kw and 12kw models can be plugged into single-phase and three-phase) Water consumption: ~ 6L / hour
Warranty 2 years (off problem associated with limestone or abnormal use)
The steam generator must be getting power with the right power protection. (the power supply must be connected to the terminal block for connecting electrical power to the unit)
The control box connects to the motherboard of the unit for the temperature setting, time etc... the cable is 5 metres, the probe should be placed halfway up the hammam room. The probe is wired on a length of 3.2 metres.
Then it feeds the generator in water. (provide an anti-scale system to avoid any problem on the device, or difficulty of operation)
We connect the pressure release valve and draining to the evacuation.
We connect the steam release at the nozzle with a copper or flexible hose (available in Accessories for hammam) corrugated steel as well as all materials resistant to a temperature of 110 degrees with a diameter of 16 see 18 O) must also keep a pen you from the steam generator to the mist outlet nozzle.
Programmable on a length of 99 minutes, sold with nozzle steam output, control box, sensor, exhaust fan and ozonator (accessory 12V ultrasonic disinfection).
Automatic drain steam generator, perfect for home use
Suitable for an area of about 9 to 12 M3
Recommended for home use, sold with accessories (nozzle steam output, Control Panel, probe, ozone generator and fan 12 V...)
Suitable for an area of about 5 to 9 m3, robust, easy to install and use, fast heat-up time
Programming length (0 to 99 minutes), the temperature of the steam room, control of light, ventilation and automatic drain
For 3 to 6 m3 hammam spaces
Steam generator comes with control box, probe and mist outlet nozzle
Programming the duration of the session 0 to 999 minutes, and the room temperature between 40 and 60 °
Stainless drain automatic and transformer 12 V built-in tank control accessories
Steam generator for full hammam with accessories for spaces of 12 to 18 m3
Control box "full options" (control of light, ventilation, the duration of the session (0-999 minutes), Temperature 40-60 ° c)
Temperature probe and provided steam release nozzles, automatic drain end, tank inox, transformer built-in 12v and pre-wired lighting to facilitate...
For cabin and steam room of small volume from 1 to 3 m 3
Delivered ready to be plugged into a power outlet.
Complete kit with Aromatherapy nozzle, ventilation, ozonator, FM radio, speaker, phone, LCD screen, automatic drain, stainless steel tank function...