Steam Generator For Hammam 6Kw Desineo Professional series prenium automatic emptying all options

Suitable for a room of hammam 6 to 8 m3 

Electrical power: 6 kw (single-phase branching)

Automatic emptying, stainless steel vat.

Water consumption: 6 to 9 litres per hour in continuous operation

Dimensions: 425-160-315 mm 

Weight: 12 kg

Control box and options 

- Setting the duration of the session: 0-60 minutes or continuous mode

- Temperature setting: 35 to 60 degrees Celsius

- Start-up and stop the steam generator

- Control of the light from the control panel

- Control panel dimensions: 103-103-45 mm

- Time management of the session.

Control of the various options depending on the control box that can be installed in the wet room but we recommend its installation outside the hammam in order to extend its life.

Pro series control unit

Thanks to the Desineo pro series control unit (provided), you will be able to network all the options in our Pro Series Desineo range.

You'll be able to control everything from the control panel and even your smartphone.

The options available (not provided are):

Ref lighting kit: tololedkit01boitier

Perfume pump two perfume ref: aromapump

Ref automatic scaling pump: descalingpump

ON/OFF steam control button on demand ref: onoffswitch

Air extractor ref: exhaustfan

APP device allowing control of the generator through the steamtecsauna ref application: appdevice

Waterproof Pregnant Kit 2 X 80W With Deported Remote Control And Remote Control USB/Bluetooth/SD/FM Card 

ref: tolo-music

Electrical connection

Has : Electrical arrival that must be connected directly to your electric meter with the right fuse 

B Exit of the cable that connects to the control box (5 meters) and the lighting precab

Also allows the passage of cables for lighting (not provided) controllable from the control box

Water connection

1 In: Steam output (15/21)

2 In: Safety soup (15/21)

3 : Water inflamed - 20mm (15/21)

4 : Automatic emptying - 25 mm (20/27) to connect to your drain

Automatic functions

 
1. Auto-filling:
The water infly electrovan will open automatically once the system is started and will fill
until the water level reaches the maximum level. If the water level is still
below the minimum water level 10 minutes after
defect of the water system
Work.

 
2. Automatic heating by

The generator will compare the measured ambient temperature with the temperature

the number of resistances to be fed

 
3. Automatic drainage:
When time is up or the ON/OFF button is pressed down, the system drains
automatically and displays "dd" on the LCD screen. The drain valve opens to drain.
After a while, the system will open the intake valve to cool the tank and the resistances
The system will automatically shut down after drainage