Leave us a message
Treatment and water filtration
Hand dryer and sanitary equipment
Shower and accessories
83,25 € tax incl.
Kit to achieve the junctions between the receiver and the walls of the wall and the wall strips
Two-component waterproofing mortar.
Hydraulic mortar pre-dosed high waterproofing performance.
-Roll of tape armed with 45 m x 10 cm
-Strip 5 meter
Excellent adhesion on most media (concrete, mortar, stone, brick) - impermeability to water - insensitivity to the gel.
Paste the armed band between the plates, screw heads and all areas in waterproofing, and make 2 passes of mortar SIKATOP 121 in the same sense to avoid air bubbles.
Make a hole between the receiver and the wall, paste the top Strip, and then repeat a passage.
Kit of 10 kg ready for use with bucket for application
(make small mixtures by weighing the 2 components in order to not to use the product once)
The mortar allows pasting of the receiver, the gluing of plates on the wall, the waterproofing of the sealing strips, the junction of the plates, the tile glue, and can also be used for finishing coating... its use is multiple.
Allowed for contact with water intended for human consumption
CTC 25 concrete cell Protection
In accordance with the standard NF EN 12004 (mortar-adhesive)
Do not hesitate to contact us if you have any questions!
The application is done on all vertical and horizontal panels junctions as well as all the screw heads. semi-adhesif for an easier application! 45 m x 5 cm Once asked, apply a coating of type under layer of sealing.
The application is done on all vertical and horizontal panels junctions as well as all the screw heads. Once the band asked, apply a coating of type under layer of sealing. (SIKATOP 121) Semi-adhesive band for an easier application!
Lot of 50 pucks fixation for panels ready to tile Allows to fix the panels for mounting on rails or on frame wood 3.6 cm - diameter of 5.5 mm hole diameter
Membrane to seal coat 5 m x 10 cm applications on junctions vertical and horizontal of the panels ready to tile XPS (extruded polystyrene) to apply with a type under layer of waterproofing coating
Grey two-component waterproofing mortar Allows ready for tiling, gluing of plates, the realization of the sealing strips, armed gangs and recipients Can be used as tile glue or use topcoat Its use is multiple. Hydraulic mortar pre-dosed high waterproofing performance
-Waterproofing showers, pools, caves...-Collage of borders-Gluing of plates-Realization of the bands-Ready to tile recipients sealing-Tile glue-Finishing coating-Under layer-High waterproofing performance
Screw to Frappé for extruded panel support! sold per packet of 10-room
|48/72 H (2 semaines dom-tom)||120,00 € (tax incl.)|
|125,00 € (tax incl.)|