Categories:

Contact us

Professional steam generator 6kw Intense for Hammam View full size

Professional steam generator 6kw Intense for Hammam

Steam for steam room professional 6Kw generator Intense ™

Drain automatic, light steering, steam nozzle anti-scald feature programmatically scheduled or continuous, simplified descaling! 

Everything is pre-wired for a simplified installation! 

Suitable for a volume of 5 to 9 m3

Warranty 2 years 

More details

OCC60

890,00 €

Intense ™ steam generator 6kw 

New range of professional steam generator all options: 

 

-Command deported with the switching control, time, temperature, lighting, drainage...

The remote control also features 8 LEDS of built-in diagnostics that will indicate you ongoing operations so remotely control the good operation of the appliance. 

-Steam on-demand from a second order deported with button pusher. (press 5 sc on the "Drain" button to activate the steam at the request, the appliance option maintain the water at about 80 degrees until the steam on demand button is pressed. Once the button press the unit generates again steam within 30sc.The red light will illuminate during 30 minutes of operation, once the time past the generator continues to conserve water at 80 °, then the indicator turns off. Simply press the button to relaunch a 30 minute session. (allows savings of energy and water during calmer periods)

-Continuous steam: 

For a market continuously set the duration on 240 min and press 'SET' to trigger the "continuous steam" mode.

-Programming of the time:

The arrows allow you to choose a duration ranging from 10 to 240 min

-Temperature setting: 

The arrows allow you to choose between 30 to 60 ° c

-Cleaning Automatic the tank:

at the end of each use, once the chilled water,. the tank drains automatically. Then the Bowl fills again to rinse to clean and prevent the deposit of limestone.

To get good conditions of operation of the appliance it is essential to protect the limestone and regularly for checkups.

-Descaling simplified

Simply remove 4 screws visible on the upper part of the unit to access the water level sensor. Once removed, it must pour the citric acid through the hole and close the hatch. Do turn the appliance then cut it and wait a few hours before you turn it back on and press "Drain".

Your device is cleaned! 

-Nozzle anti-scald:

A red pvc nozzle is provided to avoid burns.

-Probe protection: 

a small conical hatch is provided to protect the probe of possible shocks on the part of users.

 

 

Technical details:

  • Useful volume of heating: 5-9 m3
  • The generator size: 39 x 19 x 34 cm
  • Weight: 11.6 kg 
  • The control box size: 15 x 9 cm / 5 m cable length
  • Size of the housing "steam on demand: 6 x 6 cm"
  • Probe 3 Mmo cable on 3.2 meters, the cache size for probe: 4.5 Cmo
  • Steam outlet nozzle: 10.5 Cmo female thread 15/21 (1/2)
  • Water supply: 15/21 (1/2) male
  • Steam outlet: 15/21 (1/2) male
  • Drain: 15/21 (1/2) male / pressure valve 15/21 (1/2) female 
  • Electrical connections: single phase 220v or 380v three-phase (without modification to the device)
  • Water consumption: ~7l/h
  • 2 year warranty (excluding problem associated with limestone or abnormal use)
 

Simplified installation: 

  1. The steam generator must be powered with suitable electrical protection. (the electrical arrival must be connected to the terminals of the device electrical connection)
  2. The control box is connected to the motherboard of the unit for the temperature setting, time etc... the cable is 5 meters, the probe should be placed halfway up the hammam room. The probe is aabout a length of 3.2 metres.
  3. Then it feeds the generator in water. (provide a limestone anti system to avoid any problem on the device, or difficulty of operation)
  4. When connecting the pressure valve and the drain to the drain.
  5. When connecting the steam outlet nozzle by means of copper, or flexible pipe steel ringed (available in Accessories for steam bath) as well as any materials resistant to a temperature of 110 ° with a diameter of 16 see 18 O) should also maintain a slope ranging from the steam generator to the steam outlet nozzle.

 

 

 

 

 

 

 



Write your review

Write your review